LED-Strip MQ5630SG-24-126A-WW, warm white, IP20, 5-m-reel

METOLIGHT LED strip MQ5630SG-24-126A-WW - warm white

LED strip in professional quality, 24 V DC, 5-m-roll, 3000K, Samsung 5630 SMD, 130 lm/W - 2800 lm/m

126 LEDs /m, 22 W /m, 110 W / reel, LED spacing 8 mm, IP20

The LED strip series MQ5630SG are designed for professional use. They are characterized by numerous technical details, which significantly stand out METOLIGHT LED strips from cheap LED strips from the supermarket or hardware stores. METOLIGHT LED-Strips only use high-performance Samsung SMD-LEDs type 5630 with an efficiency of 130 lm / W (white), fixed to flexible polyimide circuit board having 35 µm Cu layer by silver solder paste. Each LED-section has its own IC controlled constant current driver. Thus a long-term function and consistent LED brightness over the entire roll length of 5 meters is assured. 

Single colour LED-Strips Series MQ5630SG can be connected directly to a 24 V DC constant voltage driver. They are availabe in light colours warm white, nature white and cold white, CRI Ra >80

These LED-Strips come with brighness of 2800 lm per meter

Further data:
LED quantity: 126 LEDs / m - 630 LED / reel
LED spacing: 12 mm
LED type: Samsung SMD 5630 - 130 lm / W (White), CRI Ra >80
Beam angle: 120 °
Cuttable: every 7 LEDs, marking on the LED Strip
Width: 12 mm
Height incl LEDs: 2,5 mm
PCB: polyimide, white, 0.2 mm thick
Cu layer 2 oz - 35 microns
Voltage: 24 V DC
Power consumption: 22 W / m - 110 W / Reel
Current: 1,83 / m - 4,6 A / reel

Application areas:
The LED strip with protection class IP20 (Code A) may only be used in dry indoor areas for general decorative lighting. It may not be operated in damp or wet areas. Application areas are lighting in rooms, shops, counters, backlit, indirect lighting in ceiling or floor moldings and much more.

Delivery forms:
We provide these LED Strip exclusively B2B to specialist dealers or installers. The minimum order is 10 rolls of 5 meters.
The series MQ5630SG-24-126A LED strips are available in the colors 3000K (warm white), 4000K (naturel white), 6000K (cool white)

Installation:
The back of our LED strip is provided with a 3M adhesive tape, so that the LED strips are glued to dust-free, dry surfaces. We recommend especially for continuous lighting of the LED strips to stick on aluminum flat profiles or our special LED profiles to ensure optimal heat dissipation. Sticking on wood or other heat insulating surfaces leads to overheating and thus shortened shelf life of the LEDs.

Electrical connection:
The LED strip must be connected to a stabilized power supply with 24 V DC output voltage, optionally also to respective batteries. Please pay attention to correct polarity. The red connection cable leading to the positive terminal of the power supply. The use of cheap, unregulated power supplies may damage the LED Strip, since such power supplies usually make a significantly higher output voltage (depending on the load connected).