ESD-antistatic film METOSTAT MST-100-10, Rollware

Product No.:
101287
EAN Nummer:
4251192824660
365,00 EUR
plus 19% tax excl. Shipping costs

METOSTAT ESD antistatic film MST-100-10

ESD foil, roll material 1.22 m wide, 10 m long, clear, non-adhesive


The METOSTAT ESD film MST-100 is a transparent polyester film 0.1 mm thick, non-adhesive, both sides coated with a dissipative surface coating. It is suitable for electrostatically dissipating window panes, synthetic glass panes and other flat, smooth and insulating surfaces. The Rp is 106 to 108 ohms.
The film is capable of copying and is resistant to abrasion. However, the film is not suitable for a permanent application of abrasive parts.
For electrostatic discharge the film must be earthed, e.g. via a grounded metal rail, metal strip, ESD rubber strips, ESD brushes or other suitable grounding means.
The ESD film has excellent transparency, chemical resistance and good abrasion resistance. It is ideal for application in electronics manufacturing, semiconductor, solar circuit board manufacture, in clean rooms and, of course, for use in ESD work areas according to DIN EN 61340-5-1.
The film has a minimum triboelectric charging behavior and offers a very good electrostatic discharge behavior.

Physical forms:
We supply this film as rollware 122 cm wide, 10 m long (standard)
as customer-specific rollware (lengths up to 100 meters)
as a roll off cut (122 cm wide, length from 1 m, then staggered by 50 cm each)
as a Din A4 blank
In the version MST100K we deliver this film also self adhesive coated on one side.

Main technical data:
Material: polyester film, 0.1 mm thick
Roll width: 122 cm
Roll length: 10 m (optional lengths up to 100 m available)
Antistatic coating: both sides, durable, not self-adhesive,
antisatatic on both sides
Light transmittance: 80%
Rp-p (DIN EN 61340-2-3): 106 ~ 108 Ohm
Tensile strength> 170 N / mm²
Pencil hardness: 3H


Synonyms:
This ESD film is also known as ESD film, antistatic film, dissipative film, electrostatic film, dissipative polyester film, clean-room film, dissipative foil

 

 
Technical Data
 
Beschreibung Daten / Data Description
Markenname METOSTAT Brand name
Modell MST-100 Model
Komposition Polyesterfilm Composition
Dicke 0,1 mm Thickness
Breite 122 cm Width
Länge 10 m Length
Selbstklebend nein / no Self Adhesive
Oberflächenwiderstand 10^6 ~ 10^8 Ohm - DIN EN 61340-2-3 Surface Resistance
Statische Ableitung < 0,1 s - EIA 541 Static Decay
Entspricht EN 61340-5-1 Complies
Reißfestigkeit MD > 170 N/mm² / TD > 240 N/mm² - ASTM D882-A Tensile Strength
Umformfestigkeit MD > 95 N/mm² / TD > 95 N/mm² - ASTM D882-A Yield Strength
Bruchdehnung MD > 200% / TD > 120% - ASTM D882-A Break Elongation
Bleistifthärte 3H Pencil Hardness
Therm. Schrumpf 0,8% - 150°C - 5 Min Thermal Shrink
Opt. Transparenz 80% Optical Transparency
Trübung 7,3% Turbidity
Chemische Beständigkeit nach / acc to AST D-543 Chemical Resistance
Entionisiertes Wasser Beeinflussung der Oberfläche: keine / Influence of the surface: none De-Ionisized Water
30% Schwefelsäuse Beeinflussung der Oberfläche: keine / Influence of the surface: none 30% Sulphuric Acid
30% Salpetersäure Beeinflussung der Oberfläche: keine / Influence of the surface: none 30% Nitric Acid
30% Salzsäure Beeinflussung der Oberfläche: keine / Influence of the surface: none 30% Hydrochloric Acid
Methanol Beeinflussung der Oberfläche: keine / Influence of the surface: none Methanol
Äthanol Beeinflussung der Oberfläche: keine / Influence of the surface: none Ethanol
IPA Beeinflussung der Oberfläche: keine / Influence of the surface: none IPA
Methylenchlorid Beeinflussung der Oberfläche: keine / Influence of the surface: none Methylene chloride
Hinweis Lieferbar als Rollenware, Rollenabschnitt, Zuschnitt - Available as roll ware, roll cut off, cut to size Notes
Data Sheets & Downloads